temperature recovery

Based on the temperature recovery method, a new model is presented to handle the latent heat release of gray cast iron during the solidification process of both primary solidification and the eutectic solidification stages.

基于潜热处理的温度回升法，针对灰铸铁凝固过程中具有初晶和共晶两个阶段的凝固特性，提出了适合灰铸铁的带共晶的潜热处理方法。

Optimizing the boiling temperature of the waste heat exchanger in the low temperature waste heat power recovery system

低温余热动力回收系统余热流换热器蒸发温度的优化

Effect of Different Recovery Temperature on Recovery Stress of Ni-Ti-Nb Alloys

不同回复加热温度对Ni Ti Nb合金回复应力的影响

In this paper, the effect of flux components, flux addition and melting temperature on recovery ratio and impurity content was analyzed.

本文实验研究了熔剂配比、熔剂加入量和熔炼温度等对铸造废铝屑的回收率、合金含杂量的影响。

The recovery efficiency was employed to determine the temperature recovery in the soil on the basis of the experimental data.

根据实验取得的数据分析，采用恢复率对比方法，描述不同工况后的土壤恢复情况。

The Rankine cycle of low boiling medium and its application to low temperature waste-heat recovery in foreign countries are reviewed.

本文介绍低沸点工作介质的兰金循环特点及目前国外运用这种循环方法回收和利用低温余热的情况。

Under intermittent operation condition, temperature recovery at night and load trace at the end of running period of three ground surface forms are compared.

对间歇运行工况下，三种上垫面形式下的夜间恢复情况和运行周期末的负荷痕迹值进行了对比分析。

The AcOH consumption was reduced to 54kg/ t by the means of lower temperature operation, azeotropic rectifying, by product recovery and utilization.

扬子石化采用降温操作、共沸精馏和副产物回收利用，使醋酸消耗降至54kg/t。

In the paper, the synthesized solidification latent treatment model adapted to any casting alloy has been put forward by revising the temperature recovery method.

本文对合金潜热处理温度回升法进行修正，建立了一种适用于任意合金的凝固综合潜热处理方法。

Environmental Temperature and Heat Recovery of Platform Subway System

地铁站台系统的热环境及废热回收

Results: The temperature recovery rate in 30 minute was better in alcohol bath group ( P < 0.01).

结果：30min内体温恢复率以酒精擦浴为佳（P

The main advantages of low temperature refrigerant recovery equipment are safe, easy to use and high recovery rate.

低温式制冷剂回收装置具有使用安全、便捷及高回收比等优点。

Evolution of Persistent Slip Bands in Fatigued Copper Single Crystals Under Intermediate Temperature Recovery

中温回复下疲劳Cu单晶体驻留滑移带的演变

The Thermodynamic Principle and Formula for Determining the Optimal Boiling Temperature in Low Temperature Waste Heat Power Recovery System

低温余热动力回收系统中确定最佳蒸发温度的热力学原则和计算式

Analysis of Low Temperature Refrigerant Recovery Equipment

基于低温方法的制冷剂回收装置分析

The processing method for latent heat releases in alloy castings is introduced by the combination of the temperature recovery and the equivalent heat capacity, which can be applied in alloy solidification of any temperature range with the high efficiency.

通过温度回升法与等效热容法的结合，提出了一种能够处理铸件凝固潜热释放问题的方法，它可适用于任意结晶温度区间，且计算效率很高。

The suitable recovery strain annealing temperature was 500 ℃.

适宜的回复应变退火温度为500℃.

With the help of the process simulation software-PRO-ⅱ, the impact of variation of feedback temperature of rich absorption oil on the energy recovery and the operation of the main fractionator in fluid catalytic cracking or delayed coking units was analyzed in detail.

借助流程模拟软件PRO／Ⅱ详细分析了吸收稳定系统富吸收油返回催化裂化或延迟焦化主分馏塔温度对操作及热量回收的影响。

The temperature recovery rate in 3 days was high in HTI group ( P < 0 05).

3天以内体温恢复率以HTI最高（P

The development history, technology characteristics of low temperature heat recovery steam generator and technical issues in its development are introduced.

阐述了水泥窑余热锅炉技术的发展历程、纯低温余热锅炉的技术参数及纯低温余热锅炉的开发过程中面临技术难点。

Methods: Organic reagent was used as matrix modifier, the analytical informations between before and after adding organic matrix modifiers were compared, for example, atomic temperature, recovery and RSD etc.

方法：采用有机试剂为基体改进剂，比较加入有机基体改进剂前后的原子化温度、回收率和精密度等分析信息。

The Exergy Analysis of Middle-low Temperature Heat Recovery Power System and Parameter Optimization Research

中低温余热发电系统的（火用）分析及其参数优化研究

A two dimensional mathematical model for ingot solidification has been established and new methods such as revised temperature recovery method, mean boundary radiation thermal flow and variable time-step length by zone have been applied in this paper.

本文建立了钢锭冷凝过程的二维数学模型，采用了修正温度回升法、平均边界辐射热流、分区变时间步长等新方法。

Heart rate, temperature and recovery time of gastrointestinal function were observed every day after surgery, and numeration of leukocyte was reviewed in the third day after surgery. 4.

术后每天监测体温、心率变化、观察胃肠功能恢复时间、用药第3天复查白细胞计数，观察两组治疗效果。

This article first studied the influence of operating pressure, time, temperature and recovery on the separation performance of NF membrane.

首先研究了操作压力、时间、进水水温及回收率对纳滤膜通量变化的影响。

However time for body temperature recovery, anal exsufflation time and discharge time had no significantly differences between two groups.

在术后体温恢复正常时间、肛门排气和平均住院时间方面差异无统计学意义。

Effect of Suspended Bed with Different Temperature on Recovery of Burned Children

悬浮床不同温度对烧伤患儿创面愈合的影响

First under laboratory conditions, the experiment explore the factors affecting the performance of reverse osmosis, these factors include: operating pressure, temperature, recovery rate, pH, and water salinity.

本实验主要针对上述问题展开，首先在实验室条件下，探索影响反渗透性能的因素，这些影响因素主要包括：操作压力、温度、回收率、pH和进水含盐量。

The curative rater of cefoperazone was 97. 2% and the time for body temperature recovery was 2. 6 ± 1.7 days.

头孢哌酮显效率为97.2%，体温恢复平均时间为2.6±1.7d。

Reduction of flue gas exhaust temperature and recovery of heat energy of flue gas;

降低排烟温度，回收排烟热能；